ESD pump, ESD taiko marine pumps

I-j. Centrifugal ESD Pump

Qmax to 1200m3/h, Hmax to 32m, double suction, similar to Taiko ESD.

SKU: High efficiency, Compact installation space, Inlet and outlet flange same size, Easy installation/service, Double suction type, Spacer coupling type, Similar to Taiko pump Categories: , , , , , , ,

The SILI ESD pump is an ideal centrifugal marine pump. ESD marine pump is popularly used in marine and offshore industry. It is a centrifugal water pump with volute casing in vertical construction. And it is single stage, single flow. This pump is similar to Taiko ESD pump, with same design, specification and same size. ESD taiko marine pump is suitable liquid for fresh water or sea water with little particle below 70 C degree. ESD centrifugal pump typical application is for fresh and seawater cooling pumps, bilge and ballast pumps, fire-fighting, general service pumps, deck-wash pumps and so on. This pump is in spacer coupling type.

ESD Pump APPLICATION: Cooling Fresh water, Cooling Seawater, Sea Water Service Bilge & Ballast, Ballast, Fire &General Service.

CONSTRUCTION: Vertical inline, single stage, double suction. Spacer coupling type.

PUMP MATERIAL: Pump casing and cover: cast iron(for fresh water) and bronze(for sea water), pump impeller: bronze, pump shaft: stainless steel, shaft seal: mechanical seal or soft packing seal.

MOTOR: in high class and insulation level, TEFC, IEC standard, 50Hz or 60Hz; especially designed for marine and off shore purpose.

The ESD vertcial double suction centrifugal marine pump is solid casing with spacer coupling, the pump can be disassembled or inspected without removing the motor. There is neither load to the motor bearing nor problem in case of the dry operation because the pump shaft has an independent bearing. The pump can be used as an automatic self-priming pump by fitting an air ejector.

ESD pump is in same desgin and size with Taiko pump. ESD pump spare parts can be also available in our sides. Since it is produced in China, the price for pump and spare will be much competitive.

Refer to more pump and its spare parts details from the ESD pump catalogue.

Please refer to our pump catalouge

Standard pump supply range: pump, coupling, motor, pedestal and standard accessories.

Optional supply: accessories: vacuum and pressure gauge, opposite flange, starter, valves, nuts and bolts and so on, suggested min spare parts: 1 pcs of impeller, 1 pcs of shaft, 2 pcs of mechanical seal, 2 sets of bearing, 6 pcs of O-ring

Certificate of classification society available: ABS, BV, and CCS,

Packing: in ply wooden case for international export.

Production time: usually in 55 to 65 days.

Warranty time: one year after shipment.

Case reference: it is updated in case blog.
Please click the following link for relative case.

Usage or application: This pump can be use for ballast, GS, fire-fighting, cooling, bilge and so on.
Please click the relative category in right of the production picture for more information.

Kindly send your specific inquiry, we will reply you in one working day.
Please contact us through:
a. directly send us an e-mail
b. contact us throught the online Skype or Online message(just working time in working day).
c. leave a message on the web.

Your Name (required)

Your Email (required)


Your company name

Your Message