The SILI EMD pump is an ideal centrifugal marine pump. EMD marine pump is popularly used in marine and offshore industry. It is a centrifugal water pump with volute casing in vertical construction. And it is single stage, double suction (the split casing type). This pump is similar to Taiko EMD pump, with same design, specification and same size. EMD taiko marine pump is suitable liquid for fresh water or sea water with little particle below 70 C degree. EMD centrifugal pump typical application is for fresh and seawater cooling pumps, bilge and ballast pumps, fire-fighting, general service pumps, deck-wash pumps and so on. This pump is in closed coupling type.
EMD Pump APPLICATION: Cooling Fresh Cooling Sea Water Sea Water Service Bilge & Ballast Ballast, Fire &General Service
CONSTRUCTION: Vertical inline, single stage, double suction. Closed coupling type.
PUMP MATERIAL: Pump casing and cover: cast iron(for fresh water) and bronze(for sea water), pump impeller: bronze, pump shaft: stainless steel, shaft seal: mechanical seal or soft packing seal.
MOTOR: in high class and insulation level, TEFC, IEC standard, 50Hz or 60Hz; especially designed for marine and off shore purpose.
EMD vertical double suction centrifugal marine pump is solid casing type and is fitted to motor shaft rigidity. This series can be used for Linepump because the center of gravity and height is low and suction inlet and discharge out let of the both sides are in a straight line. The pump can be used as an automatic self-priming pump by fitting an air ejector.
EMD pump is same in design and size with Taiko pump. EMD pump spare parts can be also available in our sides. Since it is produced in China, the price for pump and spare will be much competitive.
Refer to more pump and its spare parts details from the EMD pump catalogue.
Please refer to our pump catalouge
Standard pump supply range: pump, coupling, motor, pedestal and standard accessories.
Optional supply: accessories: vacuum and pressure gauge, opposite flange, starter, valves, nuts and bolts and so on, suggested min spare parts: 1 pcs of impeller, 1 pcs of shaft, 2 pcs of mechanical seal, 2 sets of bearing, 6 pcs of O-ring
Certificate of classification society available: ABS, BV, and CCS.
Packing: in ply wooden case for international export.
Production time: usually in 55 to 65 days.
Warranty time: one year after shipment.
Case reference: it is updated in case blog.
Please click the following link for relative case.
Usage or application: This pump can be use for ballast, cooling, GS, fire-fighting, bilge and so on.
Please click the relative category in right of the production picture for more information.
Kindly send your specific inquiry, we will reply you in one working day.
Please contact us through:
a. directly send us an e-mail
b. contact us throught the online Skype or Online message(just working time in working day).
c. leave a message on the web.