The SILI VSN pump is an ideal centrifugal marine pump. VSN marine pump is popularly used in marine and offshore industry. It is a centrifugal water pump with volute casing in vertical construction. And it is double stage, single flow. This pump is similar to Taiko VSN pump, with same design, specification and same size. VSN taiko marine pump is suitable liquid for fresh water or sea water with little particle below 70 C degree. VSN centrifugal pump typical application is for bilge and ballast pumps, fire-fighting, general service pumps, deck-wash pumps and so on.
VSN Pump APPLICATION: Fire & General Service Bilge & Ballast Cooling Fresh Water Cooling Fresh Water
CONSTRUCTION: Vertical two stage, single suction, split casing type.
PUMP MATERIAL: Pump casing and cover: cast iron(for fresh water) and bronze(for sea water), pump impeller: bronze, pump shaft: stainless steel, shaft seal: mechanical seal or soft packing seal.
MOTOR: in high class and insulation level, TEFC, IEC standard, 50Hz or 60Hz; especially designed for marine and off shore purpose.
The pump casing of the type VSN centrifugal marine pump is vertically split type. Suction inlet and discharge outlet are arranged on both sides of rear casing, so that the pump can be dismounted and inspected without removing the connection pipe. The pump can be used as an automatic self-priming pump by fitting a vacuum pump (type: N-20) of an air ejector. VSN pump spare parts can be also available in our sides.
It has same design and size with Taiko VSN pump, VSN pump spare parts can be also available in our sides. Since it is produced in China, the price for pump and spare will be much competitive than pump from Japan.
Refer to more pump and its spare parts details from VSN pump catalogue.
Please refer to our pump catalouge
Standard pump supply range: pump, coupling, motor, pedestal and standard accessories.
Optional supply: accessories: vacuum and pressure gauge, opposite flange, starter, valves, nuts and bolts and so on, suggested min spare parts: 1 pcs of impeller, 1 pcs of shaft, 2 pcs of mechanical seal, 2 sets of bearing, 6 pcs of O-ring
Certificate of classification society available: ABS, BV, and CCS.
Packing: in ply wooden case for international export.
Production time: usually in 55 to 65 days.
Warranty time: one year after shipment.
Case reference: it is updated in case blog.
Please click the following link for relative case.
Usage or application: This pump can be use for Ballast, fire-fighting and so on.
Please click the relative category in right of the production picture for more information.
Kindly send your specific inquiry, we will reply you in one working day.
Please contact us through:
a. directly send us an e-mail
b. contact us throught the online Skype or Online message(just working time in working day).
c. leave a message on the web.
