EMC pump, marine pumps

I-a. Centrifugal EMC Pump

Qmax to 300m3/h, Hmax to 25m, 4 poles, similar to Taiko EMC.

SKU: High efficiency, Compact installation space , Inlet and outlet flange same size, Easy installation/service, Similar to Taiko pump. Categories: , , , , , , , ,

The SILI EMC pump is an ideal centrifugal marine pump. EMC marine pump is popularly used in marine and offshore industry. It is a centrifugal water pump with volute casing in vertical construction. And it is single stage, single flow. This pump is similar to Taiko EMC pump, with same design, specification and same size. EMC taiko marine pump is suitable liquid for fresh water or sea water with little particle below 70 C degree. EMC centrifugal pump typical application is for fresh and seawater cooling pumps, bilge and ballast pumps, fire-fighting, general service pumps, deck-wash pumps and so on. This pump is in closed coupling type.

EMC Pump APPLICATION:  Cooling Fresh Water, Cooling Sea Water, Sea Water Service and Ballast.

CONSTRUCTION:  Vertical inline, single stage, single suction. Closed coupling type.

PUMP MATERIAL: Pump casing and cover: cast iron(for fresh water) and bronze(for sea water), pump impeller: bronze, pump shaft: stainless steel, shaft seal: mechanical seal or soft packing seal.

MOTOR: in high class and insulation level, TEFC, IEC standard, 50Hz or 60Hz; especially designed for marine and off shore purpose.

The EMC vertcial centrifugal marine pump is solid casing type and is fitted to motor shaft rigidly. This series can be used for Line pump because the center of gravity and height is low and suction inlet and discharge out let of the both sides are in a straight line. The pump can be used as an automatic self-priming pump by fitting an air ejector.

It has same design and size with Taiko EMC pump, EMC pump spare parts can be also available in our sides. Since it is produced in China, the price for pump and spare will be much competitive.

Refer to more pump and its spare parts details from the EMC pump catalogue.

Please refer to our pump catalouge

Standard pump supply range: pump, coupling, motor, pedestal and standard accessories.

Optional supply: accessories: vacuum and pressure gauge, opposite flange, starter, valves, nuts and bolts and so on, suggested min spare parts: 1 pcs of impeller, 1 pcs of shaft, 2 pcs of mechanical seal, 2 sets of bearing, 6 pcs of O-ring

Certificate of classification society available: ABS, BV, and CCS.

Production time: usually in 50 to 60 days.

Warranty time: one year after shipment.

Case reference: it is updated in case blog.
Please click the following link for relative case.

Usage or application: This pump can be use for cooling, ballast, fire-fighting, bilge, GS and so on.
Please click the relative category in right of the production picture for more information.

Kindly send your specific inquiry, we will reply you in one working day.
Please contact us through:
a. directly send us an e-mail
b. contact us throught the online Skype or Online message(just working time in working day).
c. leave a message on the web.

Your Name (required)

Your Email (required)

Subject

Your company name

Your Message