EHS pump, EHS taiko marine pump

II-p. Centrifugal EHS Pump

Qmax to 300m3/h, Hmax to 70m, coupling type, similar to Taiko EHS

SKU: High efficiency, Compact installation space, Coupling type, Self-priming, Easy installation/service, Similar to Taiko pump Categories: , , , , , ,

The SILI EHS pump is a single stage, single suction, end-suction centrifugal marine pump. It is especially with built-in self-priming device. (No need for extra water ring or air ejector vacuum pump). EHS centrifugal pump is suitable liquid for fresh water or sea water with little particle below 70 C degree; specially mechanical seal for 120 C degree. The Taiko EHC pump is are single-stage volute casing pumps used in marine and off shore industry. Hydraulic design and dimensions comply with ISO 2858. The pump is a so-called “End-suction” type, i.e. suction and pressure branches are mounted on vertical line.

The EHS horizontal self-priming centrifugal marine pump application for fire-fighting pump, bilge pump, ballast pump, G/S(general service pump), and also cooling pump. With its built-in self-priming device, it is very suitable for the emergency condition purpose, there is no need extra self-priming pump, so the EHS marine pump save space and make easy operation and maintenance. EHS pump spare parts can be also available in our sides.

EHS Pump APPLICATION: Cooling Fresh Water Cooling Sea Water Fresh Water, Sanitary

CONSTRUCTION: Horizontal, single stage, single suction, closed coupling type.

PUMP MATERIAL: Pump casing and cover: cast iron(for fresh water) and bronze(for sea water), pump impeller: bronze, pump shaft: stainless steel, shaft seal: mechanical seal or soft packing seal.

MOTOR: in high class and insulation level, TEFC, IEC standard, 50Hz or 60Hz; especially designed for marine and off shore purpose.

The EHS-type is close-coupled type. Since pump is fixed to motor shaft rigidly, a common base for installation is not needed. The gland-packing is adopted as a standard of the method of shaft sealing.

The EHS centrifugal marine pump is in same design and size with Taiko pump. EHS pump spare parts can be also available in our sides. Since it is produced in China, so the price is much competitive for the both pump and its pump spares

Refer to more pump and its spare parts details from the EHS pump catalogue.

Refer to more details from the pump catalogue.

Standard pump supply range: pump, coupling, coupling guard, motor, common base and standard accessories.

Optional supply: accessories: vacuum and pressure gauge, opposite flange, starter, valves, nuts and bolts and so on, suggested min spare parts: 1 pcs of impeller, 1 pcs of shaft, 2 pcs of mechanical seal, 2 sets of bearing, 6 pcs of O-ring

Certificate of classification society available: ABS, BV, and CCS.

Packing: in ply wooden case for international export.

Production time: usually in 50 to 65 days.

Warranty time: one year after shipment.

Case reference: it is updated in case blog.
Please click the following link for relative case.

Usage or application: This pump can be use for bilge, fire-fighting and so on.
Please click the relative category in right of the production picture for more information.

Kindly send your specific inquiry, we will reply you in one working day.
Please contact us through:
a. directly send us an e-mail,
b. contact us throught the online Skype or Online message(just working time in working day).
c. leave a message on the web.

Your Name (required)

Your Email (required)


Your company name

Your Message