CISW centrifugal marine pump

II-k. Centrifugal CBY Pump

Qmax to 50m3/h, Hmax to 125m, closed coupling type of CIS pump

SKU: Small space request, easy service and operation, perfomance is same with CISG pump, closed coupling type. Categories: , ,

The SILI CBY pump is the end-suction centrifugal marine pump, performance is same with CISG pump.

CBY horizontal centrifugal marine pump is a closed coupling type with compact structure, these series pumps have an integrally horizontal structure, less space occupied, which, comparing with the ordinary ones, is reduced by 30%.

Stable running, low noise, by the straight joint between the motor and the pump, the middle structure is made simplified

A mechanical seal of antiseptic carbide alloy is used for the shaft sealing

Convenient service, service can be easily done without removing any pipeline because of the back-door structure.

refer to more information about the CBY pump from the pump catalogue.

Technical details:

–Motor: 2 or 4 pole quality IEC motor configurations, with high level class(class F or higher) and insulation(insulation IP44 or higher), in both 50Hz or 60Hz, Y-H series, suitable for marine purpose, Starting in direct type(small power) or Star-delta type.

–Material: pump casing/cover: bronze(sea water) or cast iron(fresh water), pump impeller/wear ring: bronze, shaft, shaft sleeve and key, stainless steel

–Shaft seal: mechanical seal, material: SIC(silicon carbide),hard alloy and ceramics,

–Coupling: mono-block type, pump is directly connected with motor.

–Bearing: motor side, two enclosed antifriction bearing, lubricated by grease; There is no bearing in pump sides

–Accessory: motor terminal box, lifting hooks, grease nipple, air vent plug, drain plug, gauge connection plug and so on.

Standard pump supply range: including pump, common base, motor and standard accessories.

Optional supply: accessories: vacuum and pressure gauge, opposite flange, starter, valves, nuts and bolts and so on, suggested min spare parts: 1 pcs of impeller, 1 pcs of shaft, 2 pcs of mechanical seal, 2 sets of bearing, 6 pcs of O-ring

Certificate of classification society available: ABS, BV, and CCS.

Packing: in ply wooden case for international export.

Production time: usually in 20 to 25 days.

Warranty time: one year after shipment.

Case reference: it is updated in case blog.
Please click the following link for relative case.

Usage or application: This pump can be use for cooling, daily service and so on.
Please click the relative category in right of the production picture for more information.

Kindly send your specific inquiry, we will reply you in one working day.
Please contact us through:
a. directly send us an e-mail , sales@silipump.com(suggested).
b. contact us throught the online Skype or Online message(just working time in working day).
c. leave a message on the web.

Your Name (required)

Your Email (required)

Subject

Your company name

Your Message